Special Features:

Dwg name valve, shut-off; major component parts: solenoid assembly, poppet, shaft, flanges, inlet/outlet housing, body, & seat; burst pressure 360psig @ +570 degrees feh; proof pressure 193psig @ +570 degrees feh; normal/failure position closed; timing 5.0 se (max) to open/close; 18-30 vdc & 1.0 amps(max); rated airflow 100lbs/min @ 105psia & 570 degrees feh(upstream) & 29psia(downstream); ambient temp -65 to +250 degrees feh; inlet oper temp -65 to +700 degrees feh, pressure 10 to 145psig; wt 3.15lbs(max) ; type of fluid: eng compressor bleed air; length flange to flange 5.00; 2.5 inch in hot air shut-off valve, solenoid controlled, pneumatically operated

Properties:

A valve having two or more ports with valve stem or pilot needle in a normally open or closed position. It is specifically designed to stop or start or change the flow of fluid by means of the magnetic action of an electric coil on a moveable core or plunger. The valve may be equipped with a manual opening or closing device. For items with three or more ports that utilize a reciprocating slide with recess areas which mate with ports in an integral or replaceable ported sleeve, see valve (1), linear, directional control. It may be inline or cartridge (manifold) design. Excludes valve (1), butterfly.