Special Features:

Brush, electrical contact part (t)shape construction, consist of (1) brush contact pn 11594237-2, note (1) side 0.11in.Min.Silver layer, mating body (1) pn 11594237-3, to left and right of brush-body assembly wire braid pn 11594237-5 and end terminal pn 11594237-4, lower part of (t) is pinpn 11594237-3; brush contact: silver, graphite, copper alloy, body: copper alloy, wire braid: spec qq-b-575, terminals: copper, pin: copper specification qq-c-502; shear test reqd; refer dwg cage 19207 pn 11594237.

Properties:

An item specifically designed to be used in the transfer of electrical energy to or from another conducting surface. Either the brush or the surface is continually moving during the transfer of energy. The brush is usually composed in part of some form of the element carbon. Includes: (1) a single brush either with or without an attached shunt (flexible wire lead) and/or a helical or flat type pressure spring; (2) a split brush composed of two or more pieces (wafers), which are used in place of one brush usually connected together by individual shunts to a common terminal; (3) paired brushes composed of two identical or non-identical brushes connected together by a common shunt either with or without pressure springs or connected by individual shunts to a common terminal, or with pressure springs and connected to a common bar, bracket or the like either with or without individual shunts; (4) multiple brushes composed of more than two identical or non-identical brushes without pressure springs connected by individual shunts to a common terminal, or with pressure springs and connected to a common bar, bracket or the like by individual shunts. Does not include moving contacts which make and slide past stationary contacts, but are stationary while the circuit is conducting, such as the sliding contacts on a rheostat or the stationary contact on a synchro. Excludes: contact, electrical; and contact assembly, electrical.