- Home
- NSN Catalog
- Hardware And Abrasives
- Nuts And Washers
- NSN 5310-01-352-9588
NSN 5310-01-352-9588
Flat WasherPricing & Availability Check
Submit this form for stock availability and pricing.Inventory
This product may be available in the following quantities and conditions.
- NE: 242921
- NS: 7402
- AR: 1
- OH: 34
- SV: 1
Please note that inventory for this NSN was updated 02/10/2025 and may have changed since then. Request a quote for up to date pricing and availability.
Product Definition Definition of approved item name (AIN): "WASHER,FLAT"
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Major End Items End items to which 5310-01-352-9588 is a component of
- ATF Hc-130) Ec-130e Mc-130h Sof ( Ac-130h Aircraft
- BCA Improved Boat Cradle
- BPN C-2a (reprocured) Aircraft
- BYM Tactical Air Opns Module (an/tyq-(23)
- CBA Ch47( ) Chinook Unique Avionics-qw
- CFN Mh-53e Helicopter
- CPN Ah-1w Advance Attack Helicopter
- CTF Air Force Osprey V-22a Aircraft
- CXN Marine Corps Osprey V-22a Aircraft
- N/A Radar Set Subassembly
- N/A Attack Helicopter
- N/A Aircraft Maintenance Fixture
- N/A Landing Gear Strut Piston
- N/A Infrared Collimator
- N/A Circuit Card Assembly
- N/A Optical Instruments Test Set Subassembly
- N/A Electrical-electronic Equipment Control Panel
- N/A Indicator Panel
- N/A Power Supply
- N/A Antenna Coupler
- N/A Manifold Valve Assembly
- N/A Butterfly Valve
- N/A Electronic Components Assembly
- N/A Power Supply-test Set
- N/A Aircraft Components Test Set Subassembly
- N/A Electro-optical System Components Test Stand
- N/A Linear Electro-mechanical Actuator
- N/A Test Adapter
- N/A Resistor Assembly
- N/A Cable Breakout Adapter
- N/A Standardized Electronic Module
- N/A Subassembly Countermeasure Set
- N/A Interconnecting Box
- N/A Aircraft Power Unit Maintenance Stand
- N/A Electronic Frequency Converter
- N/A Waveguide Devices Test Set Group
- N/A Electrical And Electronic Test Equipment Test Set Subassembly
5310-01-352-9588 Spec. NSN part characteristics
Cross Reference Parts Part numbers that meet the specification outlined on this page and set by the OEM
Identification Item Identification Guide (IIG) and Item Name Code (INC)
Special material and handling
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
Item does not contain precious metal.
Represents items with no adp components
The item is an aviation critical safety item/flight safety critical aircraft part (acsi/fscap).
Import and Export
Schedule B Codes Definitions:
Washers Other Than Lock Washers, Iron Or Steel
Finished Metal Shapes
Screws, Bolts, Nuts, Screw Hooks, Rivets, Washers and Similar Articles, Not Threaded, Of Iron Or Steel
National motor freight and handling
Freight Codes Definitions:
No special type of cargo code applicable.
Bolts or nuts (iron or steel),(less than 35 feet).
Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater.
Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Other or no special handling required (sh)