NSN 3110-00-052-9135

Duplex Ball Bearing
DEMIL
Shelf Life
UOM
NIIN
Demil:
NO
Shelf Life:
N/A
UOM:
1 PR
NIIN:
000529135

Pricing & Availability Check

Submit this form for stock availability and pricing.
Part Number:
Quantity:
Email Address:
Phone Number:
Your Name:
Company:



Privacy Policy    Terms & Conditions

Product Definition Definition of approved item name (AIN): "BEARING,BALL,DUPLEX"

Two single row annular ball bearings selected dimensionally to be a matched pair or set. The ring faces have been specially ground to specified offsets that will produce predetermined preload when mounted. May include a single row angular contact bearing with faces specially ground for duplex mounting.

3110-00-052-9135 Spec. NSN part characteristics

MRC
Name
Detail
MRC:
ABMK
Overall Width
30.0 millimeters
MRC:
ABXV
Bore Diameter
40.0 millimeters
MRC:
ADGA
Overall Outside Diameter
68.0 millimeters
MRC:
AGYE
Surface Finish
Ground
MRC:
AGYF
Retainer Fabrication Method
Machined
MRC:
AGZC
Load Direction
Angular
MRC:
AGZH
Internal Fit-up Designation
Standard
MRC:
CTFZ
Standard Tolerance Designation
Abec no.3
MRC:
CTHQ
Bearing Preload Rating
40.0 pounds
MRC:
FEAT
Special Features
Bearings stabilized for operationfrom m 65 to p 300 degrees f, inner and outer races flush within 0.0005 in. When preloaded, bearings marked w/same serial no.
MRC:
MATT
Material
Steel comp e52100 outer ring
MRC:
MDCL
Material Specification
Fed-std-66 federal standard single material response outer ring
MRC:
STYL
Style Designator
Counterbored outer rings, non-separable, face to face mounting
MRC:
TEST
Test Data Document
38443-aqcp-2 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). And 38443-aqcp-9a specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). And 38443-ais-84a specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). And 21335-aps-33a specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). And 21335-aps-36a specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).

Cross Reference Parts Part numbers that meet the specification outlined on this page and set by the OEM

Part Number
Cage
RNCC
RNVC
DAC
RNAAC
Status
MSDS
SADC
Part Number:
205-040-106
Cage Code:
97499
RNCC:
1
RNVC:
2
DAC:
1
RNAAC:
CT
Status:
A
MSDS:
SADC:
Part Number:
3M9108WIMBRDUA1076
Cage Code:
21335
RNCC:
3
RNVC:
2
DAC:
1
RNAAC:
CT
Status:
A
MSDS:
SADC:
Part Number:
7108KRDF
Cage Code:
38443
RNCC:
3
RNVC:
2
DAC:
3
RNAAC:
CT
Status:
A
MSDS:
SADC:
Part Number:
205-040-106-1
Cage Code:
97499
RNCC:
5
RNVC:
2
DAC:
1
RNAAC:
CT
Status:
A
MSDS:
SADC:
Indicates a design/source control reference item
Inidicates part number has been superseded

Identification Item Identification Guide (IIG) and Item Name Code (INC)

INC
FIIG
Concept No.
App. Key
Cond. Code
Status
INC:
30213
FIIG:
A044A0
Concept No.:
App. Key:
E
Cond. Code:
1
Status:
A

Special material and handling

HMIC
PMIC
ESD
ENAC
ADPE
CRITL
HMIC:
N
PMIC:
U
ESD:
ESD:
ADPE:
CRITL:
X
Hazmat (HMIC) N

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Precious Metals (PMIC) U

Precious metal content is unknown

Criticality X

The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Import and Export

Schedule B
NAIC
End Use
SITC
USDA
HITECH
Schedule B:
8482105068
NAICS:
332991
End Use Class:
21180
SITC:
74610
USDA:
1
HITECH:
0

Schedule B Codes Definitions:

Schedule B 8482105068

Ball Bearings, Nesoi

End Use Code 21180

Industrial Machines, Other

Standard Intl. Trade Class (SITC) 74610

Ball Bearings

National motor freight and handling

NMFC
Class
UFC
LTL
LCL
WCC
TCC
SHC
ADC
ACC
NMFC:
114820
NMF Description:
Bearings/bushings Noi Ball/roller
UFC:
58860
LTL:
77.5
LCL:
--
WCC:
742
TCC:
Z
SHC:
9
ADC:
A
ACC:
V

Freight Codes Definitions:

Cargo Type (TCC) Z

No special type of cargo code applicable.

Water Commodity (WCC) 742

Bearings.

Air Commodity (ACC) V

Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing.

Air Dimensions (ADC) A

Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Special Handling (SHC) 9

Other or no special handling required (sh)